This flat non-pen mount is perfect for a variety of applications including satellite dish installations for DirecTV, Dish Network, Viasat, Wi-Fi antennas, and more!
A wide variety of different antenna mounts fit this non-penetrating roof mount including the SLP-F, 18DISH, 1820DISH, and DTV66E series antennas as well as most 18” and 24” oval dishes.
You can also drill clearance holes for any other small dish foot pattern you might wish to attach.
This mount includes the mounting pad/rubber mat!
The topmost holes (eight) are for attachment of a ‘wind leg’ brace. the center holes (four) accommodate a small dish in the center of the frame if you prefer that location. The lower set of various hole patterns accommodate the larger antennas and still provides enough space for one wind leg (support struts) at the top and one to the side (neither are included). If you refer to the upper left photo, you can see the correct arrangement of the optional ‘wind leg’ braces.
The optional side-mounted wind leg can be mounted in several locations of the side frame. The pipe stands provided with antennas can vary in length, therefore you need to select the side hole that aligns best with the mount you are installing. The above drawing shows two different optional locations for the side wind leg depending on the pipe stand length. Use the included angle bracket in the bolt kit bag to attach the side wind leg to the frame. You must space the concrete blocks out to allow passage of the side wind leg to the side frame.
Optional Rubber Matt:
We offer a rubber mat for this mount that is slightly larger than the mount frame and helps protect the roof surface from indentations – part number 120_NPRMAT8.
Bolt Kit Contents:
- One (1) Angle Bracket
- Eight (8) 5/16” x 0.75” Hex head bolts Grade 5
- Four (4) 5/16” Hex nuts
- Six (6) 5/16” Split ring lock washers
- Two (2) 5/16” Flat washers
- Two (2) Green self-tapping ground screws (Refer to local codes for ground wire requirements.)
Specs:
- Uses one of several J-mount brackets from DirecTV, DISH Network, Viasat and more!
- Frame size: 35″ x 36.25″
- Holds up to 8 – 8x8x16 concrete blocks or 2 1/2″ blocks
Shipping Dimensions:
- Each
38.50 in. wide x 1.75 in. high x 35.63 in. deep
Volume: 2,400.57 cubic in.
Weight: 23.15 lbs.
- Pallet
38.75 in. wide x 70.75 in. high x 36.00 in. deep
Volume: 98,696.25 cubic in.
Weight: 850.25 lbs.
Quantity: 35 ea.