This pipe adapter (a.k.a. pole adapter, mast adapter, mount adapter, pole mount adapter) was specifically designed for Exede / WildBlue / Viasat conversions!
It goes from an existing 2 3/8″ O.D. pipe (a.k.a. pole, mast, mount, etc.) down to a 50mm O.D. which is required for Exede / WildBlue / Viasat and other satellite dish antenna installations!
This pipe adapter is commonly used for converting HughesNet .74m or .98m ( 2 3/8″ O.D.) mounts to a 50mm O.D. mount which is required for Viasat antennas! It can also be used for other antennas or equipment requiring a 2″ O.D. pipe or pole mount!
This pipe adapter allows you to install a satellite dish on an existing mast in 10 minutes. Save time & Money by re-using existing surfaces.
This pipe adapter has been modified to work better for Exede installations:
- New advanced Viasat approved 2nd generation Quick Pipe Adapter. 2 3/8″ OD poles to 50mm OD Viasat dish
- New 6 bolt design for increased out of plumb adjustments on 2 3/8″ poles up to 3.5 degree out of plumb.
- One piece End formed no welding. Now with 50 mm OD top for correct fit.
- M8 x 1.25 mm bolts with 13mm hex cap screw same as the Exede dish. Very convenient.
Installation:
Slide pipe adapter over existing 2 3/8″ O.D. pipe / pole / mast. Tighten Bolts. Check to make sure the adapter is level in two perpendicular directions. Do not over tighten bolts.
Features:
- 2″ O.D. 9″ Length
- Over-pipe design
- Heavy Duty Schedule 40
- Grade 8 Bolts
- Powder Coated
- Weight: 2 lbs.